
TOYOTA HILUX MIRRORS · MELBOURNE
Toyota HiLux Mirror Replacement — Melbourne
The HiLux has been Australia's best-selling vehicle for years, and mirrors are the part that takes the most punishment on a working ute.
HiLux mirrors change significantly between the older manual-fold Workmate and later powered, heated and blind-spot equipped trims. We identify the exact part from a photo before quoting.
As Featured In
Toyota HiLux mirror replacement in Melbourne is one of the most frequent jobs on our books. Utes live on sites, in laneways and in carparks not built for their width, and the mirror is the first thing to make contact.
The Workmate and the SR5 are very different mirrors. One folds by hand and carries nothing electrical; the other has a fold motor, heating and often blind-spot monitoring. Fitting the wrong one is the most common mistake we are called out to correct.
-
Every Make & Model
We supply and fit new replacement mirror glass and components for every make and model since 1902 to today.
-
Servicing Melbourne Wide
Our mobile car mirror repair service is equipped to cater to all of Melbourne (metro area), ensuring our assistance reaches far & wide.
-
OUR SERVICE
ALL WORK GUARANTEED
All of our workmanship and products include a written warranty of 12 to 48 months, depending on the model and the work done. The terms and conditions are simple and straight-forward.
Of course, if any damage is caused by misuse, negligence or through an accident, we do not cover it!
Workmate or SR5 — what changes
Trim level decides the part. These four differences account for almost every wrong-part job we see.
Workmate mirrors fold by hand. Higher trims carry a fold motor and a completely different housing.
Later trims heat the mirror off the rear-demist circuit. Plain glass on a heated truck loses the demist for good.
Most later HiLux mirrors carry the repeater in the cover, and it is replaceable on its own.
Recent dual cabs put the warning icon inside the glass, which changes the part number entirely.

-
Quality Products
We cut all of our mirror glass ourselves right here in Australia using only ADR compliant, automotive mirror glass. When it comes to mirror parts and entire assemblies, we only supply genuine quality parts unless you request otherwise.
-
Anytime & Anywhere
Effortless Installation Anytime, Anywhere! Our team will expertly complete all installations externally, ensuring your convenience. Once we locate your parked vehicle, consider the job done without any disruption to your schedule.
-
All Mirror Parts
We can replace and repair mirror motors, covers, glass and indicators so when you are told by others that you need to replace the whole unit, give us a call first and let us advise on the most cost effective and convenient course of action.
What a HiLux mirror costs
A HiLux is priced the same way as anything else: by how much of the assembly is actually broken.
| What is broken | What we do | Typical cost* |
|---|---|---|
| Glass only | Correct ADR-compliant glass cut and fitted to your existing backing plate. | from $135 |
| Cover / housing | Outer cap swapped, glass and motor kept. | $150–$300 |
| Full mirror, plain | Whole assembly, manual or basic powered mirror. | $200–$350 |
| Full mirror, powered | Electric adjust, power fold or integrated indicator. | $350–$500 |
| Blind-spot, camera or auto-dim | Mirrors carrying driver-assist electronics. | Quoted per vehicle |
*Indicative bands. A complete HiLux mirror is quoted per vehicle because the part varies so much between Workmate and higher trims. Send a photo and we price the exact one. Every band here comes from our national price guide — the single source of truth for what we charge. Read the full side mirror replacement cost guide.
Utes take far more cover damage than glass damage. If the mirror still adjusts, folds and flashes, a scuffed or cracked cover is a $150 to $300 job — not a reason to replace the whole mirror.
The Anatomy
What’s inside a car side mirror
Five parts that can fail independently — and only one that’s usually broken. That’s where the money-saver hides.

The 5 layers of a modern car side mirror — when only layer 1 is broken, you only pay for layer 1.
Why HiLux mirrors get destroyed
Wide mirrors on a working vehicle in a city built for narrower cars. The causes are consistent.
The most common one on work utes. Narrow access, wide mirror, one of them gives.
Columns and pipes sit right at ute mirror height in carparks designed around sedans.
A HiLux parked on an inner-suburban street leaves the mirror in the traffic lane.
If your HiLux has powered fold, use the button. Hand-folding strips the gearbox.
Why choose Car Mirror Man in Melbourne
Glass, cover, motor and indicator are separate parts. We only ever change what is actually broken.
ADR-compliant automotive mirror glass, cut here — so we are never forced into a full-assembly-only part.
Home, work or the station carpark. Glass-only fits from outside, so the car can stay locked.
In writing. Unlimited on mirror glass for as long as you own the vehicle, three years on a full mirror assembly, twelve months on an individual replacement part.
600+ Client Reviews
How your Melbourne mobile fit works
Coverage
Melbourne suburbs we service
We provide mobile side mirror replacement right across metro Melbourne, the bay to the Dandenongs — every suburb listed below. We come to your home or work.
Toyota HiLux mirror replacement Melbourne — your questions answered
How much is a HiLux mirror replacement in Melbourne?
Glass alone starts at $135. Covers are $150 to $300. A complete HiLux mirror is quoted per vehicle because Workmate and SR5 parts differ substantially.
Will you know which HiLux mirror my ute takes?
Yes, from a photo. The differences between trims are visible from the outside once you know what to look for.
Can you fit it at a work site?
Yes. We fit at homes, workplaces and yards right across metro Melbourne.
My HiLux mirror works but the cover is smashed. Can you do just the cover?
Yes, and on a working ute that is usually exactly the right call.
Does the indicator come separately?
On most later HiLux mirrors the indicator repeater is its own part in the cover and can be changed on its own.
Will the replacement keep my blind-spot monitoring?
Yes, provided we fit the correct blind-spot glass. That is why the trim is identified before we quote.
How long does it take?
Glass is twenty to forty minutes. A complete assembly is usually done inside the hour.
Do you work on other utes?
Yes. Ranger, Triton, D-Max, BT-50, Amarok and Navara are all regular work for us.
